1000kw-2000kw Hot Selling Single Stage Steam Turbine Power Plant

In the context of today's times, more and more companies are also committed to developing green Water Wall Tube Panel, Steam Turbine Generator, Extraction Condensing Steam Turbine to seize the market opportunities. We take quality assurance and service first as our primary goal. We hope that the international competitive strength of the enterprise will be significantly enhanced, and the brand influence and international popularity will be significantly increased. We will increase the strength of scientific and technological investment and accelerate the pace of development of enterprises.

Products Brief Introduction

The moving steam imparts both a tangential and axial thrust on the turbine shaft, but the axial thrust in a simple turbine is unopposed. To maintain the correct rotor position and balancing, this force must be counteracted by an opposing force. Thrust bearings can be used for the shaft bearings, the rotor can use dummy pistons, it can be double flow- the steam enters in the middle of the shaft and exits at both ends, and a combination of any of these. In a double flow rotor, the blades in each half face opposite ways, so that the axial forces negate each other but the tangential forces act together. This design of rotor is also called two-flow, double-axial-flow, or double-exhaust. This arrangement is common in low-pressure casings of a compound turbine.

Scope of Supply

Dongturbo is the original manufacturer for all kinds of sealing rings for steam turbine, so we can provide you with the very same spare parts of steam turbine as the original manufacturer can do.

- Rotor;

- Moving Blades of Rotor;

- HP/IP/LP Gland Sealing;

- HP/IP/LP Diaphragms;

- Seal Rings;

- Couplings between Steam Turbine and Generator;

- Spcial Studs and Nuts;

- Bolts and Nuts of Turbine Casings;

- Bolts and Nuts of Diaphragms;

- Thrust Bearings and Surport Bearings;

- Gaskets, Srews, Keys, Pins, Washers, Grooved gaskets;

- Turning Gear;

- Babbit Metal Lined Bearings;

- Stem, Disc, Pilot and Sleeve of Main Steam Stop Valves, Combined Steam Valves, Governing Valves;

- Actuators of Control System;

- Steam Strainer;

- Start up Oil Pump and Spare Parts;

- Jacking Oil Pump and Spare Parts;

- Main Oil Pump and Spare Parts;

- Emergency Oil Pump and Spare Parts;

- Condensate Pump and Spare Parts;

- Jet Water Pump and Spare Parts;

- Drainage Pump and Spare Parts;

- Spare Parts of Circulating Water Pump;

- Spare Parts of DEH, TSI, ETS;

Our company will conscientiously fulfill its social responsibilities, keep in mind the value mission, do a good job of products and services wholeheartedly, and open up a bright future for the 1000kw-2000kw Hot Selling Single Stage Steam Turbine Power Plant industry! We understand and analyze the needs of customers in detail, and give full consideration to product compatibility, scalability and technical support while providing solutions, so as to meet the needs of different customers. We have summed up the production experience carefully, improved production equipment, and reduced production costs, so that our products have a strong advantage in the competition.