ASTM A471/A471M ASTM А 471 type 2 Class 10 Type 5 Forged Forging Steel Steam turbine COMPRESSOR WHEEL Turbine Disks Turbine Wheel Rotor Shafts STUB SHAFT

Our Organic Rankine Cycle (ORC) Solution, Coal-fired Hot Water Boiler, Unit Retrofitting have passed international quality system certification and are widely recognized by customers in various fields. We continue to develop products with good quality and good taste to meet the needs of consumers at different levels. We have been willing to build long-term, friendly and mutually beneficial cooperation with you. 'Honesty based, friendship' is our company's values, showing righteousness with affection, taking profit with righteousness, and combining righteousness with profit. We strengthen our competitiveness by entering into strategic cooperation agreements with companies that possess leading-edge technology.

Products Brief Introduction

The moving steam imparts both a tangential and axial thrust on the turbine shaft, but the axial thrust in a simple turbine is unopposed. To maintain the correct rotor position and balancing, this force must be counteracted by an opposing force. Thrust bearings can be used for the shaft bearings, the rotor can use dummy pistons, it can be double flow- the steam enters in the middle of the shaft and exits at both ends, and a combination of any of these. In a double flow rotor, the blades in each half face opposite ways, so that the axial forces negate each other but the tangential forces act together. This design of rotor is also called two-flow, double-axial-flow, or double-exhaust. This arrangement is common in low-pressure casings of a compound turbine.

Scope of Supply

Dongturbo is the original manufacturer for all kinds of sealing rings for steam turbine, so we can provide you with the very same spare parts of steam turbine as the original manufacturer can do.

- Rotor;

- Moving Blades of Rotor;

- HP/IP/LP Gland Sealing;

- HP/IP/LP Diaphragms;

- Seal Rings;

- Couplings between Steam Turbine and Generator;

- Spcial Studs and Nuts;

- Bolts and Nuts of Turbine Casings;

- Bolts and Nuts of Diaphragms;

- Thrust Bearings and Surport Bearings;

- Gaskets, Srews, Keys, Pins, Washers, Grooved gaskets;

- Turning Gear;

- Babbit Metal Lined Bearings;

- Stem, Disc, Pilot and Sleeve of Main Steam Stop Valves, Combined Steam Valves, Governing Valves;

- Actuators of Control System;

- Steam Strainer;

- Start up Oil Pump and Spare Parts;

- Jacking Oil Pump and Spare Parts;

- Main Oil Pump and Spare Parts;

- Emergency Oil Pump and Spare Parts;

- Condensate Pump and Spare Parts;

- Jet Water Pump and Spare Parts;

- Drainage Pump and Spare Parts;

- Spare Parts of Circulating Water Pump;

- Spare Parts of DEH, TSI, ETS;

We abide by the core values of respecting rules, innovation and pragmatism, and provide the best quality ASTM A471/A471M ASTM А 471 type 2 Class 10 Type 5 Forged Forging Steel Steam turbine COMPRESSOR WHEEL Turbine Disks Turbine Wheel Rotor Shafts STUB SHAFT for our customers. We will serve customers with higher quality products, more comprehensive services, and sound sales channels. We sincerely thank our customers for their loyalty and trust in our company and our suppliers and all our partners for their close cooperation.