Cm90 Series Single Stage Back Pressure Steam Turbine

With the support of professional technical inspectors and perfect testing methods, we ensure the stable and excellent quality of our Water Wall Tube Panel, Condensing Steam Turbine, Biomass Boiler. The essence of pioneering and innovation is a comprehensive ability, which is a synergy formed by the integration of various intellectual factors and ability qualities at a new level, interaction and organic combination. Over the years, we have insisted on taking the customer as the center and the market as the guide, strengthening technological innovation, consolidating internal management, and improving the quality of our work. Looking forward to the future, we will base ourselves on the local market with newer and higher comprehensive services.

Product Brief Introduction

There are about 30 types of driven turbines below 50 MW, which are widely used to drive industrial devices, such as blowers, induced draft fans, compressors, and pumps etc.

Work Flow and Description

Layout Form Ⅰ

Figure 1

The layout described above is suitable for two dragged devices (one used and one standby), one is driven by a steam turbine to save energy, and the other is driven by a motor. When the steam turbine is overhauled or malfunctions, the standby equipment is activated to continue to ensure that the subsequent production process is not affected.

Layout Form Ⅱ

First, the steam enters the steam turbine to flow through and perform work, and the motor (double shaft extension) is driven by the clutch, and then the motor is connected to the dragged device to do work. By transforming the mechanical energy of the steam turbine into the kinetic energy of the dragged device, the exhaust steam (or the electric energy of the electric motor) after perform work enters the subsequent steam pipeline. The layout description is shown in Figure 2.

Figure 2

The layout described above is suitable for driving a dragged device. When the steam turbine is overhauled or malfunctions, the clutch will disconnect the steam turbine and the motor, and the motor will drive the drag equipment to continue to ensure that the subsequent production process is not affected. In addition, when the power of the steam turbine selected according to the steam parameters is greater than the power of the dragging equipment, the electric motor can also be used to generate electricity. The power generation is that the dragged device cannot consume the power margin of the steam turbine.

Typical Cases

1. Feed water pump turbine

Layout of the Feed Water Pump Turbine Power Station

2. Turbines for induced draft fans

Outline drawing of turbine for induced draft fan (including the gear box)

We have established a complete quality control process system and a full set of after-sales service system, so that our customers can rest assured in the quality of our Cm90 Series Single Stage Back Pressure Steam Turbine and service. Since our establishment, we have always taken the mission of improving product quality and service as our mission, and continue to provide customers with high-quality products and services. All employees of the company united and forged ahead, overcame many difficulties and achieved a new chapter of career development.