Custom Fine Machining 42CrMo ASTM AISI4140 SAE4140 Hot Free Forging Shaft

Our company has been selling Low Medium and High Voltage Brushless Excitation Generator, Steam Turbine Generator Overhaul, Serpentine Tube for many years and has a team with rich management experience. We hope that the economic and social benefits of our company will be balanced to achieve sustainable development of the company. Relying on team operation, we uphold the enterprise spirit of 'innovation, reality seeking, cooperation and efficiency', and are determined to create greater benefits for the society and customers.

Products Brief Introduction

The moving steam imparts both a tangential and axial thrust on the turbine shaft, but the axial thrust in a simple turbine is unopposed. To maintain the correct rotor position and balancing, this force must be counteracted by an opposing force. Thrust bearings can be used for the shaft bearings, the rotor can use dummy pistons, it can be double flow- the steam enters in the middle of the shaft and exits at both ends, and a combination of any of these. In a double flow rotor, the blades in each half face opposite ways, so that the axial forces negate each other but the tangential forces act together. This design of rotor is also called two-flow, double-axial-flow, or double-exhaust. This arrangement is common in low-pressure casings of a compound turbine.

Scope of Supply

Dongturbo is the original manufacturer for all kinds of sealing rings for steam turbine, so we can provide you with the very same spare parts of steam turbine as the original manufacturer can do.

- Rotor;

- Moving Blades of Rotor;

- HP/IP/LP Gland Sealing;

- HP/IP/LP Diaphragms;

- Seal Rings;

- Couplings between Steam Turbine and Generator;

- Spcial Studs and Nuts;

- Bolts and Nuts of Turbine Casings;

- Bolts and Nuts of Diaphragms;

- Thrust Bearings and Surport Bearings;

- Gaskets, Srews, Keys, Pins, Washers, Grooved gaskets;

- Turning Gear;

- Babbit Metal Lined Bearings;

- Stem, Disc, Pilot and Sleeve of Main Steam Stop Valves, Combined Steam Valves, Governing Valves;

- Actuators of Control System;

- Steam Strainer;

- Start up Oil Pump and Spare Parts;

- Jacking Oil Pump and Spare Parts;

- Main Oil Pump and Spare Parts;

- Emergency Oil Pump and Spare Parts;

- Condensate Pump and Spare Parts;

- Jet Water Pump and Spare Parts;

- Drainage Pump and Spare Parts;

- Spare Parts of Circulating Water Pump;

- Spare Parts of DEH, TSI, ETS;

With cutting-edge technology and a strict quality control system in this area, we can guarantee the excellence and outstanding quality of our Custom Fine Machining 42CrMo ASTM AISI4140 SAE4140 Hot Free Forging Shaft. Our business philosophy is the basic belief and code of conduct in the pursuit of business success. Our staff are very proud of our customers' support and recognition.