Forged Forging Steel Gas Steam Lp Turbine Generator Rotor Intermediate Hollow Shafts OEM

Through unremitting efforts, we have used new products, new technologies and distinctive service advantages to write a legend in the field of Static Thyristor Generator, Condenser, Steam Turbine Driven Solution(pump,fan). Our company inherits the tenet of 'high quality, good price and excellent service'. We rely on excellent technical advantages, through continuous research and development and accumulation of manufacturing experience, products are sold at home and abroad. We hope that every employee should act efficiently, work hard and never be satisfied and never stop on the way forward. 'Serve attentively and pursue quality', this company has always insisted on starting from the foundation of enterprise development, adopting mature humanized management within the company.

Products Brief Introduction

The moving steam imparts both a tangential and axial thrust on the turbine shaft, but the axial thrust in a simple turbine is unopposed. To maintain the correct rotor position and balancing, this force must be counteracted by an opposing force. Thrust bearings can be used for the shaft bearings, the rotor can use dummy pistons, it can be double flow- the steam enters in the middle of the shaft and exits at both ends, and a combination of any of these. In a double flow rotor, the blades in each half face opposite ways, so that the axial forces negate each other but the tangential forces act together. This design of rotor is also called two-flow, double-axial-flow, or double-exhaust. This arrangement is common in low-pressure casings of a compound turbine.

Scope of Supply

Dongturbo is the original manufacturer for all kinds of sealing rings for steam turbine, so we can provide you with the very same spare parts of steam turbine as the original manufacturer can do.

- Rotor;

- Moving Blades of Rotor;

- HP/IP/LP Gland Sealing;

- HP/IP/LP Diaphragms;

- Seal Rings;

- Couplings between Steam Turbine and Generator;

- Spcial Studs and Nuts;

- Bolts and Nuts of Turbine Casings;

- Bolts and Nuts of Diaphragms;

- Thrust Bearings and Surport Bearings;

- Gaskets, Srews, Keys, Pins, Washers, Grooved gaskets;

- Turning Gear;

- Babbit Metal Lined Bearings;

- Stem, Disc, Pilot and Sleeve of Main Steam Stop Valves, Combined Steam Valves, Governing Valves;

- Actuators of Control System;

- Steam Strainer;

- Start up Oil Pump and Spare Parts;

- Jacking Oil Pump and Spare Parts;

- Main Oil Pump and Spare Parts;

- Emergency Oil Pump and Spare Parts;

- Condensate Pump and Spare Parts;

- Jet Water Pump and Spare Parts;

- Drainage Pump and Spare Parts;

- Spare Parts of Circulating Water Pump;

- Spare Parts of DEH, TSI, ETS;

Compared with the similar products, our Forged Forging Steel Gas Steam Lp Turbine Generator Rotor Intermediate Hollow Shafts OEM have the characteristics of good quality, low cost and so on, so they are widely welcomed. New product development is an innovative activity, and product creativity is the key to the development of new products. We continue to innovate and improve in process technology and product quality, and strive to meet the needs of our customers.