Forging Rotor for Steam Turbine/Forged Steam Turbine Rotor

We take "innovation, high quality, high cost performance" as our product development philosophy, and provide the most suitable Biomass Steam Boiler, Coal-fired Steam Boiler, Steam Turbine and Generator Retrofitting and supporting services for customers with different needs. We work tirelessly to create value and continually provide better service than our competitors. We have a scientific management style. We have a huge production scale, a sincere service attitude and a thin profit and multi-selling business approach. Uniting and motivating employees to participate in enterprise management is our company's important initiative. We have our possess manufacturing facility and sourcing place of work.

Products Brief Introduction

The moving steam imparts both a tangential and axial thrust on the turbine shaft, but the axial thrust in a simple turbine is unopposed. To maintain the correct rotor position and balancing, this force must be counteracted by an opposing force. Thrust bearings can be used for the shaft bearings, the rotor can use dummy pistons, it can be double flow- the steam enters in the middle of the shaft and exits at both ends, and a combination of any of these. In a double flow rotor, the blades in each half face opposite ways, so that the axial forces negate each other but the tangential forces act together. This design of rotor is also called two-flow, double-axial-flow, or double-exhaust. This arrangement is common in low-pressure casings of a compound turbine.

Scope of Supply

Dongturbo is the original manufacturer for all kinds of sealing rings for steam turbine, so we can provide you with the very same spare parts of steam turbine as the original manufacturer can do.

- Rotor;

- Moving Blades of Rotor;

- HP/IP/LP Gland Sealing;

- HP/IP/LP Diaphragms;

- Seal Rings;

- Couplings between Steam Turbine and Generator;

- Spcial Studs and Nuts;

- Bolts and Nuts of Turbine Casings;

- Bolts and Nuts of Diaphragms;

- Thrust Bearings and Surport Bearings;

- Gaskets, Srews, Keys, Pins, Washers, Grooved gaskets;

- Turning Gear;

- Babbit Metal Lined Bearings;

- Stem, Disc, Pilot and Sleeve of Main Steam Stop Valves, Combined Steam Valves, Governing Valves;

- Actuators of Control System;

- Steam Strainer;

- Start up Oil Pump and Spare Parts;

- Jacking Oil Pump and Spare Parts;

- Main Oil Pump and Spare Parts;

- Emergency Oil Pump and Spare Parts;

- Condensate Pump and Spare Parts;

- Jet Water Pump and Spare Parts;

- Drainage Pump and Spare Parts;

- Spare Parts of Circulating Water Pump;

- Spare Parts of DEH, TSI, ETS;

We are committed to the research, production and sales of Forging Rotor for Steam Turbine/Forged Steam Turbine Rotor. Our company is constantly innovating and making bold attempts, rather than just sticking to its own expertise. In the era of knowledge economy, innovation is the soul of the progress of the times and the fundamental guarantee for the survival and development of enterprises.