Industrial Customized Cogeneration Steam Turbine

We are committed to the R&D, manufacturing, sales of Debris Filter, Parts and Auxiliary Equipment, Steam Turbine Generator and provide customer with technical services. Looking to the future, we will continue to adhere to the corporate culture of diligence and integrity, openness and sharing, innovation and efficiency. The company has won the market with its own quality and excellent service, and at the same time has won the trust of customers. We win the praise of the industry with our continuous and stable growth and will take a new attitude to adapt to the new situation.

Speed regulation and security system Faults:

1. Increase or decrease load is insensitive, there is a jump change.

2. Static test oil motive cannot be fully opened or fully closed.

3. steam turbine speed or electricity and heat load fluctuations.

4. Extraction and back pressure cannot be put into operation.

5. Regulating valve seal is lax.

6. Steam leakage of valve stem.

7. The emergency breaking throttle, axial displacement breaking device, starting valve, emergency breaking and resetting device cannot hang the brake.

8. Additional security oil pressure and safety oil pressure cannot be established or the oil pressure is low.

9. Low speed emergency interrupt throttle, security operation box.

10. The oil injection test was unsuccessful.

11. LVDT calibration of turbine oil motive.

12. Configuration setting of WoodWard505, 505E, SPC and CPCⅡ ⅱ parameters.

13. The pulse oil pressure (signal oil pressure) of hydraulic spring-type oil motor cannot be established or is lower than the design value.

14. Oil motive shut down for too long.

15. OPC function cannot be put into use.

16. The rotary slide valve cannot rotate.

17. Can't run at full capacity.

18. Steam turbine load rejection speed soaring is too large.

19. Unequal rate adjustment of speed control system.

Main valve

1. When hot, the main valve can't be seated.

2. After the main valve is opened to a certain extent, it will automatically close.

3. The main valve cannot be opened.

4. The main valve does not open properly.

5. Large steam leakage.

6. The automatic shutoff cannot be tested for activities.

7. The opening of the automatic shutter is not in place.

8. The closing time of the main valve/automatic shutoff is too long

Oil system

1. The pressure of high-pressure oil pump is less than the design value.

2. The outlet pressure/inlet pressure of main oil pump of steam turbine is insufficient.

3. Insufficient pressure of turbine lubricating oil.

4. The oil return temperature of steam turbine is too high.

5. The outlet temperature of oil cooler is too high.

6. Insufficient outlet pressure of lubricating oil pump.

7. The three-way non-return valve is jammed.

8. The output of high-pressure oil pump does not match the system.

9. Poor oil return

10. Oil leakage of bearing seat

Our company directly face customers, understand customer needs and customer satisfaction with the quality of existing Industrial Customized Cogeneration Steam Turbine, improve product competitiveness. We regard our employees as the most valuable asset of our company and are willing to absorb the best and most promising talents in the world, and hope that every employee can get good development in our company. In line with the purpose of creating a high-quality brand, our company pursues the business philosophy of 'sincere creation of satisfaction' and the service principle of 'humanization and specialization'.