Industrial Single Reheat Steam Turbine for Power Supply

We use advanced technology, excellent quality and excellent service to create high-quality, cost-effective Bleed Back Pressure Type, Bagasse Boiler, Steam Turbine Driven Solution(pump,fan) for you. We introduce advanced production equipment and production technology, keeping innovating while developing and growing to maintain a leading edge in the same industry for customers. Our products are stable in quality and novel in style, and enjoy high evaluation in the industry. The whole company recognizes the future development trend of the world, takes science and technology as the innovation, and builds the company around the development idea of ??becoming bigger and stronger.

Speed regulation and security system Faults:

1. Increase or decrease load is insensitive, there is a jump change.

2. Static test oil motive cannot be fully opened or fully closed.

3. steam turbine speed or electricity and heat load fluctuations.

4. Extraction and back pressure cannot be put into operation.

5. Regulating valve seal is lax.

6. Steam leakage of valve stem.

7. The emergency breaking throttle, axial displacement breaking device, starting valve, emergency breaking and resetting device cannot hang the brake.

8. Additional security oil pressure and safety oil pressure cannot be established or the oil pressure is low.

9. Low speed emergency interrupt throttle, security operation box.

10. The oil injection test was unsuccessful.

11. LVDT calibration of turbine oil motive.

12. Configuration setting of WoodWard505, 505E, SPC and CPCⅡ ⅱ parameters.

13. The pulse oil pressure (signal oil pressure) of hydraulic spring-type oil motor cannot be established or is lower than the design value.

14. Oil motive shut down for too long.

15. OPC function cannot be put into use.

16. The rotary slide valve cannot rotate.

17. Can't run at full capacity.

18. Steam turbine load rejection speed soaring is too large.

19. Unequal rate adjustment of speed control system.

Main valve

1. When hot, the main valve can't be seated.

2. After the main valve is opened to a certain extent, it will automatically close.

3. The main valve cannot be opened.

4. The main valve does not open properly.

5. Large steam leakage.

6. The automatic shutoff cannot be tested for activities.

7. The opening of the automatic shutter is not in place.

8. The closing time of the main valve/automatic shutoff is too long

Oil system

1. The pressure of high-pressure oil pump is less than the design value.

2. The outlet pressure/inlet pressure of main oil pump of steam turbine is insufficient.

3. Insufficient pressure of turbine lubricating oil.

4. The oil return temperature of steam turbine is too high.

5. The outlet temperature of oil cooler is too high.

6. Insufficient outlet pressure of lubricating oil pump.

7. The three-way non-return valve is jammed.

8. The output of high-pressure oil pump does not match the system.

9. Poor oil return

10. Oil leakage of bearing seat

The demand of users is our pursuit. To provide users with the most suitable Industrial Single Reheat Steam Turbine for Power Supply and practical services is our firm belief. The connotation of our marketing strategy includes, unique variety, excellent quality, moderate price, timely delivery, flexible strategy, and high quality service. We have established a modern and efficient factory to reduce manufacturing costs and pursue uniform product quality.