Measurement Before Dismantling The Rotor Coupling

Our Extraction Condensing Steam Turbine, Bagasse Boiler, Coal-fired Hot Water Boiler not only enjoy popularity and a wide range of users in China, but also win high reputation abroad. Till now, the items list has been updated regularly and attracted clients from around the globe. We have formed a series of quality consciousness and quality concept in the long-term production and management. We focus on cutting-edge technologies and fully penetrate the vitality of science and technology into industries and services. With the continuous research and application of advanced technology, our company has achieved rapid development.

Products Brief Introduction

The moving steam imparts both a tangential and axial thrust on the turbine shaft, but the axial thrust in a simple turbine is unopposed. To maintain the correct rotor position and balancing, this force must be counteracted by an opposing force. Thrust bearings can be used for the shaft bearings, the rotor can use dummy pistons, it can be double flow- the steam enters in the middle of the shaft and exits at both ends, and a combination of any of these. In a double flow rotor, the blades in each half face opposite ways, so that the axial forces negate each other but the tangential forces act together. This design of rotor is also called two-flow, double-axial-flow, or double-exhaust. This arrangement is common in low-pressure casings of a compound turbine.

Scope of Supply

Dongturbo is the original manufacturer for all kinds of sealing rings for steam turbine, so we can provide you with the very same spare parts of steam turbine as the original manufacturer can do.

- Rotor;

- Moving Blades of Rotor;

- HP/IP/LP Gland Sealing;

- HP/IP/LP Diaphragms;

- Seal Rings;

- Couplings between Steam Turbine and Generator;

- Spcial Studs and Nuts;

- Bolts and Nuts of Turbine Casings;

- Bolts and Nuts of Diaphragms;

- Thrust Bearings and Surport Bearings;

- Gaskets, Srews, Keys, Pins, Washers, Grooved gaskets;

- Turning Gear;

- Babbit Metal Lined Bearings;

- Stem, Disc, Pilot and Sleeve of Main Steam Stop Valves, Combined Steam Valves, Governing Valves;

- Actuators of Control System;

- Steam Strainer;

- Start up Oil Pump and Spare Parts;

- Jacking Oil Pump and Spare Parts;

- Main Oil Pump and Spare Parts;

- Emergency Oil Pump and Spare Parts;

- Condensate Pump and Spare Parts;

- Jet Water Pump and Spare Parts;

- Drainage Pump and Spare Parts;

- Spare Parts of Circulating Water Pump;

- Spare Parts of DEH, TSI, ETS;

We firmly fulfill our core mission and strive to build the brand reputation of the most reliable supplier of the Measurement Before Dismantling The Rotor Coupling. We truly implement the principle of 'quality assurance as the guide, customer satisfaction as the core, and courteous service as the backing'. We have developed rapidly in the market economy. Since the establishment of the company, our products have been produced in strict accordance with international standards. We have won high reputation and market share in the market.