Perkins Engine Parts for 1106 Series Repair Overhaul Spares (VK PJ PK PP PR PT PU PW 1106-E60TA 1106C-E60TA 1106D-E66TA 1106D-E70TA 1106C-E66TA 1106A-70TAG)

Our products are not only distributed all over the world, we have accumulated a wealth of experience, which has established the company's solid position in the international Overhaul and Mainteinance, Condenser, Parts and Auxiliary Equipment industry. Better performance might be expected as our principle of integrity. After years of experience accumulation and development, we have rich experience and the products we produce are at the forefront of the industry in terms of quality and performance. The proposal of development strategy enables our company to know the development route and unique business philosophy in front of opportunities and challenges, and points out the direction for the company's development.

Speed regulation and security system Faults:

1. Increase or decrease load is insensitive, there is a jump change.

2. Static test oil motive cannot be fully opened or fully closed.

3. steam turbine speed or electricity and heat load fluctuations.

4. Extraction and back pressure cannot be put into operation.

5. Regulating valve seal is lax.

6. Steam leakage of valve stem.

7. The emergency breaking throttle, axial displacement breaking device, starting valve, emergency breaking and resetting device cannot hang the brake.

8. Additional security oil pressure and safety oil pressure cannot be established or the oil pressure is low.

9. Low speed emergency interrupt throttle, security operation box.

10. The oil injection test was unsuccessful.

11. LVDT calibration of turbine oil motive.

12. Configuration setting of WoodWard505, 505E, SPC and CPCⅡ ⅱ parameters.

13. The pulse oil pressure (signal oil pressure) of hydraulic spring-type oil motor cannot be established or is lower than the design value.

14. Oil motive shut down for too long.

15. OPC function cannot be put into use.

16. The rotary slide valve cannot rotate.

17. Can't run at full capacity.

18. Steam turbine load rejection speed soaring is too large.

19. Unequal rate adjustment of speed control system.

Main valve

1. When hot, the main valve can't be seated.

2. After the main valve is opened to a certain extent, it will automatically close.

3. The main valve cannot be opened.

4. The main valve does not open properly.

5. Large steam leakage.

6. The automatic shutoff cannot be tested for activities.

7. The opening of the automatic shutter is not in place.

8. The closing time of the main valve/automatic shutoff is too long

Oil system

1. The pressure of high-pressure oil pump is less than the design value.

2. The outlet pressure/inlet pressure of main oil pump of steam turbine is insufficient.

3. Insufficient pressure of turbine lubricating oil.

4. The oil return temperature of steam turbine is too high.

5. The outlet temperature of oil cooler is too high.

6. Insufficient outlet pressure of lubricating oil pump.

7. The three-way non-return valve is jammed.

8. The output of high-pressure oil pump does not match the system.

9. Poor oil return

10. Oil leakage of bearing seat

We always take quality as our way of survival. All our Perkins Engine Parts for 1106 Series Repair Overhaul Spares (VK PJ PK PP PR PT PU PW 1106-E60TA 1106C-E60TA 1106D-E66TA 1106D-E70TA 1106C-E66TA 1106A-70TAG) are produced with raw materials to ensure product quality. While insisting on creating high-quality products, we are more committed to the development of marketing network and brand strategy, and strive to meet the needs of consumers with high-quality products. We regard our employees as the most valuable asset of the company and the basis of its development.