Rotor Forging Steam Turbine Main Shaft Steam Turbine Rotor

We have cultivated a professional technical team and established a high-quality and highly dedicated sales team to make sure that our Small Condensing Steam Turbine, Condenser, Debris Filter enjoys the popularity on the market for its performance. In order to protect the interests of customers, our company adheres to diversified, efficient and in-depth communication and interaction. We take "creating lasting value for customers, development opportunities for employees, and long-term value for investors" as our mission. We adhere to the management policy of innovation and change, excellence, quality and efficiency, synergy and win-win, and aim to build a first-class enterprise.

Products Brief Introduction

The moving steam imparts both a tangential and axial thrust on the turbine shaft, but the axial thrust in a simple turbine is unopposed. To maintain the correct rotor position and balancing, this force must be counteracted by an opposing force. Thrust bearings can be used for the shaft bearings, the rotor can use dummy pistons, it can be double flow- the steam enters in the middle of the shaft and exits at both ends, and a combination of any of these. In a double flow rotor, the blades in each half face opposite ways, so that the axial forces negate each other but the tangential forces act together. This design of rotor is also called two-flow, double-axial-flow, or double-exhaust. This arrangement is common in low-pressure casings of a compound turbine.

Scope of Supply

Dongturbo is the original manufacturer for all kinds of sealing rings for steam turbine, so we can provide you with the very same spare parts of steam turbine as the original manufacturer can do.

- Rotor;

- Moving Blades of Rotor;

- HP/IP/LP Gland Sealing;

- HP/IP/LP Diaphragms;

- Seal Rings;

- Couplings between Steam Turbine and Generator;

- Spcial Studs and Nuts;

- Bolts and Nuts of Turbine Casings;

- Bolts and Nuts of Diaphragms;

- Thrust Bearings and Surport Bearings;

- Gaskets, Srews, Keys, Pins, Washers, Grooved gaskets;

- Turning Gear;

- Babbit Metal Lined Bearings;

- Stem, Disc, Pilot and Sleeve of Main Steam Stop Valves, Combined Steam Valves, Governing Valves;

- Actuators of Control System;

- Steam Strainer;

- Start up Oil Pump and Spare Parts;

- Jacking Oil Pump and Spare Parts;

- Main Oil Pump and Spare Parts;

- Emergency Oil Pump and Spare Parts;

- Condensate Pump and Spare Parts;

- Jet Water Pump and Spare Parts;

- Drainage Pump and Spare Parts;

- Spare Parts of Circulating Water Pump;

- Spare Parts of DEH, TSI, ETS;

We have been relying on the good quality of Rotor Forging Steam Turbine Main Shaft Steam Turbine Rotor, reasonable market price development direction, to improve the pre-sales, in-sales, after-sales services, to avoid the worries of customers. We are always ready, quick response, dedicated to meet the needs of our customers. Our sales team firmly believes that only by establishing good interaction with customers can we have the future of enterprise growth.