Sale Shanghai Electric Power Generation Motor Slot Wedges and Stator or Rotor

Our Biomass Boiler, Power Plant EPC and Service, Serpentine Tube competes with other manufacturers on the basis of quality, reliability, and especially the diversification of varieties. We strive to improve the working and living environment, and help employees balance work and life through rich activities to realize the common growth of the company and employees. We have the advantage of industrial resources and excellent product quality and good reputation. Through long-term practice, our company has accumulated rich technology, management and market experience.

Products Brief Introduction

The moving steam imparts both a tangential and axial thrust on the turbine shaft, but the axial thrust in a simple turbine is unopposed. To maintain the correct rotor position and balancing, this force must be counteracted by an opposing force. Thrust bearings can be used for the shaft bearings, the rotor can use dummy pistons, it can be double flow- the steam enters in the middle of the shaft and exits at both ends, and a combination of any of these. In a double flow rotor, the blades in each half face opposite ways, so that the axial forces negate each other but the tangential forces act together. This design of rotor is also called two-flow, double-axial-flow, or double-exhaust. This arrangement is common in low-pressure casings of a compound turbine.

Scope of Supply

Dongturbo is the original manufacturer for all kinds of sealing rings for steam turbine, so we can provide you with the very same spare parts of steam turbine as the original manufacturer can do.

- Rotor;

- Moving Blades of Rotor;

- HP/IP/LP Gland Sealing;

- HP/IP/LP Diaphragms;

- Seal Rings;

- Couplings between Steam Turbine and Generator;

- Spcial Studs and Nuts;

- Bolts and Nuts of Turbine Casings;

- Bolts and Nuts of Diaphragms;

- Thrust Bearings and Surport Bearings;

- Gaskets, Srews, Keys, Pins, Washers, Grooved gaskets;

- Turning Gear;

- Babbit Metal Lined Bearings;

- Stem, Disc, Pilot and Sleeve of Main Steam Stop Valves, Combined Steam Valves, Governing Valves;

- Actuators of Control System;

- Steam Strainer;

- Start up Oil Pump and Spare Parts;

- Jacking Oil Pump and Spare Parts;

- Main Oil Pump and Spare Parts;

- Emergency Oil Pump and Spare Parts;

- Condensate Pump and Spare Parts;

- Jet Water Pump and Spare Parts;

- Drainage Pump and Spare Parts;

- Spare Parts of Circulating Water Pump;

- Spare Parts of DEH, TSI, ETS;

As a well-known and reliable supplier of Sale Shanghai Electric Power Generation Motor Slot Wedges and Stator or Rotor, we are confident that our products are safe and that our quality level is industry-leading. We adjust and optimize our regional layout, consolidate and expand our overseas advantages, and accelerate the development of new markets and projects. The company actively explores and innovates in the fierce market competition, and firmly establishes itself as the leading position in this field and the industrial pattern.