Steam Turbine Nozzle Ring, Locomotive and Marine Turbocharger Spare Parts Nozzle Ring

We are a modern high-tech enterprise integrating production and sales, committed to providing Coal Fired Powe Plant EPC, Steam Turbine Generator Overhaul, Steam Turbine Blade supply, engineering design and management consulting services. Understanding the attitude of employees to work will help us to formulate corresponding human resource management measures, better retain the talents needed by enterprises, and enhance the competitiveness of enterprises. In the future, we will strive to make our company better and stronger based on the application of new technologies.

Products Brief Introduction

The moving steam imparts both a tangential and axial thrust on the turbine shaft, but the axial thrust in a simple turbine is unopposed. To maintain the correct rotor position and balancing, this force must be counteracted by an opposing force. Thrust bearings can be used for the shaft bearings, the rotor can use dummy pistons, it can be double flow- the steam enters in the middle of the shaft and exits at both ends, and a combination of any of these. In a double flow rotor, the blades in each half face opposite ways, so that the axial forces negate each other but the tangential forces act together. This design of rotor is also called two-flow, double-axial-flow, or double-exhaust. This arrangement is common in low-pressure casings of a compound turbine.

Scope of Supply

Dongturbo is the original manufacturer for all kinds of sealing rings for steam turbine, so we can provide you with the very same spare parts of steam turbine as the original manufacturer can do.

- Rotor;

- Moving Blades of Rotor;

- HP/IP/LP Gland Sealing;

- HP/IP/LP Diaphragms;

- Seal Rings;

- Couplings between Steam Turbine and Generator;

- Spcial Studs and Nuts;

- Bolts and Nuts of Turbine Casings;

- Bolts and Nuts of Diaphragms;

- Thrust Bearings and Surport Bearings;

- Gaskets, Srews, Keys, Pins, Washers, Grooved gaskets;

- Turning Gear;

- Babbit Metal Lined Bearings;

- Stem, Disc, Pilot and Sleeve of Main Steam Stop Valves, Combined Steam Valves, Governing Valves;

- Actuators of Control System;

- Steam Strainer;

- Start up Oil Pump and Spare Parts;

- Jacking Oil Pump and Spare Parts;

- Main Oil Pump and Spare Parts;

- Emergency Oil Pump and Spare Parts;

- Condensate Pump and Spare Parts;

- Jet Water Pump and Spare Parts;

- Drainage Pump and Spare Parts;

- Spare Parts of Circulating Water Pump;

- Spare Parts of DEH, TSI, ETS;

We are committed to creating reliable products and improving service quality for customers, and strive to become a leading manufacturer for Steam Turbine Nozzle Ring, Locomotive and Marine Turbocharger Spare Parts Nozzle Ring in the industry. We continue to strengthen the dynamic management of working capital to improve the economic efficiency of our company. We continue to standardize the code of conduct for employees and improve the corporate management process and rules and regulations.