Superalloy Lost Wax Casting 3D Printing Rotor for Gas/Steam Turbine Parts

We have a group of high-quality management personnel and skilled workers, constantly strive to improve ourselves, provide customers with the best service, and contribute to the Industrial Steam Turbine, Oil/gas-fired Steam Boiler, Oil/Gas Fired Boiler industry. Our company's integrity, strength and product quality have been recognized by the industry. We welcome friends from all walks of life to visit, guide and business negotiations. We look forward to working with domestic manufacturers to jointly develop overseas markets, seek greater development, and promote Chinese brand culture. We are pragmatic and active in learning, which makes our work more effective, more leisurely and interesting.

Products Brief Introduction

The moving steam imparts both a tangential and axial thrust on the turbine shaft, but the axial thrust in a simple turbine is unopposed. To maintain the correct rotor position and balancing, this force must be counteracted by an opposing force. Thrust bearings can be used for the shaft bearings, the rotor can use dummy pistons, it can be double flow- the steam enters in the middle of the shaft and exits at both ends, and a combination of any of these. In a double flow rotor, the blades in each half face opposite ways, so that the axial forces negate each other but the tangential forces act together. This design of rotor is also called two-flow, double-axial-flow, or double-exhaust. This arrangement is common in low-pressure casings of a compound turbine.

Scope of Supply

Dongturbo is the original manufacturer for all kinds of sealing rings for steam turbine, so we can provide you with the very same spare parts of steam turbine as the original manufacturer can do.

- Rotor;

- Moving Blades of Rotor;

- HP/IP/LP Gland Sealing;

- HP/IP/LP Diaphragms;

- Seal Rings;

- Couplings between Steam Turbine and Generator;

- Spcial Studs and Nuts;

- Bolts and Nuts of Turbine Casings;

- Bolts and Nuts of Diaphragms;

- Thrust Bearings and Surport Bearings;

- Gaskets, Srews, Keys, Pins, Washers, Grooved gaskets;

- Turning Gear;

- Babbit Metal Lined Bearings;

- Stem, Disc, Pilot and Sleeve of Main Steam Stop Valves, Combined Steam Valves, Governing Valves;

- Actuators of Control System;

- Steam Strainer;

- Start up Oil Pump and Spare Parts;

- Jacking Oil Pump and Spare Parts;

- Main Oil Pump and Spare Parts;

- Emergency Oil Pump and Spare Parts;

- Condensate Pump and Spare Parts;

- Jet Water Pump and Spare Parts;

- Drainage Pump and Spare Parts;

- Spare Parts of Circulating Water Pump;

- Spare Parts of DEH, TSI, ETS;

In the course of development, we always create value for our customers and the public with excellent Superalloy Lost Wax Casting 3D Printing Rotor for Gas/Steam Turbine Parts and quality services. We firmly believe that with our strong economic strength, good social reputation, standardized management system, high quality products, perfect after-sales service and efficient work efficiency, we will be able to meet your requirements and expectations. We adhere to the solemn commitment of serving the society and creating harmony, and actively fulfill our social responsibility.