Turbine Rotor Turbine Shaft and Compressor Wheel

We guarantee that through continuous innovation, hard research and development, as well as firm determination to constantly improve the Coal-fired Hot Water Boiler, Oil/gas-fired Steam Boiler, Auxiliary Equipment Retrofitting. Relying on our geographical advantages, we continue to develop and expand, and now we have grown into a professional home textile enterprise with strong comprehensive strength in China. We have won the trust of manufacturers from all over the world with the business tenet of stressing credit, emphasizing reputation, ensuring quality and keeping delivery time.

Products Brief Introduction

The moving steam imparts both a tangential and axial thrust on the turbine shaft, but the axial thrust in a simple turbine is unopposed. To maintain the correct rotor position and balancing, this force must be counteracted by an opposing force. Thrust bearings can be used for the shaft bearings, the rotor can use dummy pistons, it can be double flow- the steam enters in the middle of the shaft and exits at both ends, and a combination of any of these. In a double flow rotor, the blades in each half face opposite ways, so that the axial forces negate each other but the tangential forces act together. This design of rotor is also called two-flow, double-axial-flow, or double-exhaust. This arrangement is common in low-pressure casings of a compound turbine.

Scope of Supply

Dongturbo is the original manufacturer for all kinds of sealing rings for steam turbine, so we can provide you with the very same spare parts of steam turbine as the original manufacturer can do.

- Rotor;

- Moving Blades of Rotor;

- HP/IP/LP Gland Sealing;

- HP/IP/LP Diaphragms;

- Seal Rings;

- Couplings between Steam Turbine and Generator;

- Spcial Studs and Nuts;

- Bolts and Nuts of Turbine Casings;

- Bolts and Nuts of Diaphragms;

- Thrust Bearings and Surport Bearings;

- Gaskets, Srews, Keys, Pins, Washers, Grooved gaskets;

- Turning Gear;

- Babbit Metal Lined Bearings;

- Stem, Disc, Pilot and Sleeve of Main Steam Stop Valves, Combined Steam Valves, Governing Valves;

- Actuators of Control System;

- Steam Strainer;

- Start up Oil Pump and Spare Parts;

- Jacking Oil Pump and Spare Parts;

- Main Oil Pump and Spare Parts;

- Emergency Oil Pump and Spare Parts;

- Condensate Pump and Spare Parts;

- Jet Water Pump and Spare Parts;

- Drainage Pump and Spare Parts;

- Spare Parts of Circulating Water Pump;

- Spare Parts of DEH, TSI, ETS;

With many years of manufacturing experience, we are committed to being the leading brand in the Turbine Rotor Turbine Shaft and Compressor Wheel industry. We are committed to ensuring that we provide our customers with the highest standards of service. We seek and develop the most suitable market for us through a series of methods and strive to achieve the highest share. Our company's products have won honor and reputation in the domestic market, and exported to many countries at the same time, enjoying reputation on the world stage, and obtained various recognition.