Alignment Turbine Rotor and Driven Machine Rotor

In the production process, we formulate strict technical procedures and testing requirements to ensure the quality of the Debris Filter, Straight Back Pressure Type, Circulating Fluidized Bed Steam Boiler. We always adhere to the spirit of 'technical innovation, win-win cooperation, honesty and dedication, and excellence' to continuously improve the competitiveness of the company and provide customers with high-quality products. Over the years, our company has always adhered to the principle of valuing contracts and keeping faith, and has been unanimously recognized by the whole industry and customers.

Products Brief Introduction

The moving steam imparts both a tangential and axial thrust on the turbine shaft, but the axial thrust in a simple turbine is unopposed. To maintain the correct rotor position and balancing, this force must be counteracted by an opposing force. Thrust bearings can be used for the shaft bearings, the rotor can use dummy pistons, it can be double flow- the steam enters in the middle of the shaft and exits at both ends, and a combination of any of these. In a double flow rotor, the blades in each half face opposite ways, so that the axial forces negate each other but the tangential forces act together. This design of rotor is also called two-flow, double-axial-flow, or double-exhaust. This arrangement is common in low-pressure casings of a compound turbine.

Scope of Supply

Dongturbo is the original manufacturer for all kinds of sealing rings for steam turbine, so we can provide you with the very same spare parts of steam turbine as the original manufacturer can do.

- Rotor;

- Moving Blades of Rotor;

- HP/IP/LP Gland Sealing;

- HP/IP/LP Diaphragms;

- Seal Rings;

- Couplings between Steam Turbine and Generator;

- Spcial Studs and Nuts;

- Bolts and Nuts of Turbine Casings;

- Bolts and Nuts of Diaphragms;

- Thrust Bearings and Surport Bearings;

- Gaskets, Srews, Keys, Pins, Washers, Grooved gaskets;

- Turning Gear;

- Babbit Metal Lined Bearings;

- Stem, Disc, Pilot and Sleeve of Main Steam Stop Valves, Combined Steam Valves, Governing Valves;

- Actuators of Control System;

- Steam Strainer;

- Start up Oil Pump and Spare Parts;

- Jacking Oil Pump and Spare Parts;

- Main Oil Pump and Spare Parts;

- Emergency Oil Pump and Spare Parts;

- Condensate Pump and Spare Parts;

- Jet Water Pump and Spare Parts;

- Drainage Pump and Spare Parts;

- Spare Parts of Circulating Water Pump;

- Spare Parts of DEH, TSI, ETS;

The pursue of your enterprise, is the clients' fulfillment for Alignment Turbine Rotor and Driven Machine Rotor. We have set up a young, efficient and dynamic R & D, sales and service team based on high industry standards. We have a corporate culture of "loyalty, responsibility, efficiency and innovation", and we actively invest a lot of resources to effectively integrate the three levels of system, behavior and material to build our business.